NewSample collection centre coming to Nashik

Test scope.

Five disciplines under one NABL accredited roof. If your test is not listed, call us: we will tell you straight away whether we can do it.

Mechanical testing

Strength, ductility, hardness and toughness of bars, forgings, castings, fasteners and fabricated parts.

Universal testing machineBrinell hardness testerCharpy impact tester
TestWhat it tells youMethod / scale
Tensile testYield strength, tensile strength, elongation and reduction of area, with stress-strain diagram.IS 1608-1 / ASTM E8 / ASTM A370 / ISO 6892-1
Brinell hardness testBulk hardness of castings, forgings and heat-treated parts.IS 1500-1 / ASTM E10 / ASTM A370 / ISO 6506-1
Rockwell hardness testFast hardness check for hardened and tempered components.IS 1586-1 / ASTM E18
Vickers hardness testHardness on small sections, thin parts and surface layers.HV
Micro-Vickers hardness testCase depth measurement on carburised, nitrided and induction hardened parts.ASTM E384
Charpy impact testImpact toughness at room temperature and at sub-zero temperatures.ASTM E23

Chemical analysis

Composition of ferrous and non-ferrous alloys by spectrometer and XRF, for grade verification and incoming inspection.

Optical emission spectrometerHandheld XRF analyser
TestWhat it tells youMethod / scale
Chemical analysis by spectrometer, ferrous baseSteels, cast irons and alloy steels.Low alloy steel: IS 8811 / ASTM E415
Stainless steel: IS 9879 / ASTM E1086
Cast iron: IS 15338 / ASTM E1999
Chemical analysis by spectrometer, non-ferrous baseAluminium and copper alloys.Aluminium: IS 11035 / ASTM E1251
Copper: EN 15079
Chemical analysis by XRFNon-destructive composition of alloys and components.XRF
PMI analysisPositive material identification of parts and assemblies.ASTM E1476
RoHS analysisScreening for restricted substances.IEC 62321-3-1
Coating compositionComposition of surface coatings.XRF

Metallographic testing

Microstructure examination on prepared and etched specimens, from inclusion rating to complete cast iron analysis.

Metallurgical microscope with image analysisMicro-Vickers hardness tester
TestWhat it tells youMethod / scale
Inclusion ratingType and severity of non-metallic inclusions in steel.IS 4163
Grain size measurementAverage grain size of steels and alloys.IS 4748 / ASTM E112
Volume fractionPhase percentage by image analysis.ASTM E562 / ASTM E1245
Decarb depthDepth of surface decarburisation.IS 6396
Complete analysis of grey cast ironGraphite flake type, size and distribution, and matrix.IS 7754 / ASTM A247 / ASTM E1245 / ASTM E562
Complete analysis of nodular cast ironNodularity, nodule count and matrix.ASTM E2567 / ASTM A247 / ASTM E1245 / ASTM E562
Coating thicknessThickness of coatings and surface layers in cross-section.IS 3203

Corrosion testing

Accelerated corrosion tests for plated, painted and coated parts, and intergranular corrosion tests for stainless steels.

Salt spray test chamber
TestWhat it tells youMethod / scale
Salt spray / fog testNeutral salt spray exposure for coated and plated parts.ASTM B117
Intergranular corrosion testSusceptibility of stainless steels to intergranular attack, practices A, B, C and E.ASTM A262

Metallurgical solutions

Consultancy from the same metallurgists who test your parts, from heat treatment design to failure investigation.

Molten metal being poured in a foundry
ServiceWhat it tells you
Heat treatment cycle designCycles designed for the grade, section size and properties you need.
Consultancy for ADIAustempered ductile iron: process and property guidance.
Heat treatment process analysisFinding why a heat-treated batch misses its properties.
Failure analysisRoot cause investigation of cracked, worn or broken parts.
Material solutionsChoosing and substituting grades for cost and performance.
Consulting for lab setupPlanning equipment and processes for an in-house lab.

Not sure which test you need?

Tell us the part, the grade and what your customer asks for. Our metallurgists will suggest the right tests, free of charge.

Call +91 93092 25144